Colorsprinter
Ultrasonic Print Head Cleaner DTF Cleaning Machine for XP600
Ultrasonic Print Head Cleaner DTF Cleaning Machine for XP600
Regular price
$499.00 USD
Regular price
$330.00 USD
Sale price
$499.00 USD
Unit price
per
Couldn't load pickup availability
Print Head Cleaner Cleaning Machine Ultrasonic Print head Cleaner for Ep Print Head for Dx5 Dx7 Xp600 i3200 4720 Inkjet Print head.Ultrasonic Cleaner machine can make your print head clean in a few minute and back to work again like usual before it was .It is important to keep your head clean, because this can protract the life of print head much longer, and decrease the waste for print head clog, save printing cost.
Specification
|
Applicable Head
|
Epson/ Xaar/ S eiko/R icoh/ Konica/ Spectra Polaris...
|
|
|
||
|
Using Ink Type
|
UV Ink/Eco-solvent ink/ Solvent ink
|
|
|
||
|
Power Consumption
|
50W
|
|
|
||
|
Ultrasonic Power
|
45W/40KHZ
|
|
|
||
|
Flow
|
500ML/MIN
|
|
|
||
|
Voltage
|
110V/220V
|
|
|
||
What kind of plugs are available?
US Plug (110V)
EU Plug (220V)
CN Plug (110V)
UK Plug (110V)
How to clear print head?
1.Open the bottom lid of the machine and the lid of cleaning fluid tank.
2.Pour cleaning fluid into the cleaning fluid tank. The minimum should be over the fluid outlet port of the tank
3.Cover the cleaning fluid tank lid and the bottom lid of the machine
4.Open the top lid and put on head holder
5.Connect the inlet of print head to the flushing pipe
6.Insert the print head into head holder
7.Pour cleaning fluid into the cleaning tank ,to close to the water outlet port
8.Press the red bottom to start the ultrasonic cleaning. Keep working about 30 seconds.
9.Press the the green button which the head and pipe connected, let the cleaning fluid circulating rinse head.
10. After closing the ultrasonic cleaning, check the cleaning effect.
11.Repeated cleaning several times until the cleaning fluid which jet from the head is neat and clean.
This machine can make your print head clean in a few minute and back to work again like usual before it was .It is important to keep your head clean, because this can protract the life of print head much longer, and decrease the waste for print head clog, save printing cost.
2.Pour cleaning fluid into the cleaning fluid tank. The minimum should be over the fluid outlet port of the tank
3.Cover the cleaning fluid tank lid and the bottom lid of the machine
4.Open the top lid and put on head holder
5.Connect the inlet of print head to the flushing pipe
6.Insert the print head into head holder
7.Pour cleaning fluid into the cleaning tank ,to close to the water outlet port
8.Press the red bottom to start the ultrasonic cleaning. Keep working about 30 seconds.
9.Press the the green button which the head and pipe connected, let the cleaning fluid circulating rinse head.
10. After closing the ultrasonic cleaning, check the cleaning effect.
11.Repeated cleaning several times until the cleaning fluid which jet from the head is neat and clean.
This machine can make your print head clean in a few minute and back to work again like usual before it was .It is important to keep your head clean, because this can protract the life of print head much longer, and decrease the waste for print head clog, save printing cost.
